# Commands > Every AutoCAD command MellowCAD runs, by ribbon panel: its name, its aliases and the first thing it asks. Each command as you type it at the command line, filed under the ribbon panel you would look for it on. The first prompt is the engine's own: the same order and the same option letters you will see when you run it. ## Draw ### LINE Line - **Aliases:** `L` - **First prompt:** `Specify first point:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/draw.md#line--l--es-linea--l) ### PLINE Polyline - **Aliases:** `PL` - **First prompt:** `Specify start point:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/draw.md#pline--pl--es-pol--pl) ### 3DPOLY 3D Polyline - **Aliases:** `3P` - **First prompt:** `Specify start point of polyline:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/draw.md#3dpoly--3p--es-3dpol--3p) ### CIRCLE Circle - **Aliases:** `C` - **First prompt:** `Specify center point for circle or [3P/2P/Ttr (tan tan radius)]:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/draw.md#circle--c--es-circulo--c) ### ARC Arc - **Aliases:** `A` - **First prompt:** `Specify start point of arc or [Center]:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/draw.md#arc--a--es-arco--a) ### ELLIPSE Ellipse - **Aliases:** `EL` - **First prompt:** `Specify axis endpoint of ellipse or [Arc/Center]:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/draw.md#ellipse--el--es-elipse--el) ### SPLINE Spline - **Aliases:** `SPL` - **First prompt:** `Specify first point or [Method/Knots]:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/draw.md#spline--spl--es-spline--spl) ### RECTANG Rectangle - **Aliases:** `REC`, `RECTANGLE` - **First prompt:** `Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/draw.md#rectang--rec--rectangle--es-rectang--rec--rectangle) ### POLYGON Polygon - **Aliases:** `POL` - **First prompt:** `Enter number of sides <4>:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/draw.md#polygon--pol--es-poligono--pg) ### HATCH Hatch - **Aliases:** `H`, `BH`, `BHATCH` - **First prompt:** `Specify internal point or [Properties/Select objects]:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/draw.md#hatch--h--bh--bhatch--hatch---h---bh---bhatch--es-sombrea--sb--smb---smb--sombrea) ### -HATCH Hatch - **Aliases:** `-H`, `-BH`, `-BHATCH` - **First prompt:** `Specify internal point or [Properties/Select objects]:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/draw.md#hatch--h--bh--bhatch--hatch---h---bh---bhatch--es-sombrea--sb--smb---smb--sombrea) ## Modify ### OFFSET Offset - **Aliases:** `O` - **First prompt:** `Specify offset distance or [Through/Erase/Layer] :` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/modify.md#offset--o--es-desfase--df--eq) ### MOVE Move - **Aliases:** `M` - **First prompt:** `Select objects:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/modify.md#move--m--es-desplaza--d) ### COPY Copy - **Aliases:** `CO`, `CP` - **First prompt:** `Select objects:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/modify.md#copy--co--es-copia--cp--dup) ### STRETCH Stretch - **Aliases:** `S` - **First prompt:** `Select objects:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/modify.md#stretch--s--es-estira--ei) ### ROTATE Rotate - **Aliases:** `RO` - **First prompt:** `Select objects:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/modify.md#rotate--ro--es-gira--gi) ### SCALE Scale - **Aliases:** `SC` - **First prompt:** `Select objects:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/modify.md#scale--sc--es-escala--es) ### MIRROR Mirror - **Aliases:** `MI` - **First prompt:** `Select objects:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/modify.md#mirror--mi--es-simetria--si) ### ARRAY Array - **Aliases:** `AR` - **First prompt:** `Select objects:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/modify.md#array--ar--es-matriz--ma) ### ARRAYRECT Rectangular array - **First prompt:** `Select objects:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/modify.md#arrayrect--es-matrizrectang) ### ARRAYPOLAR Polar array - **First prompt:** `Select objects:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/modify.md#arraypolar--es-matrizpolar) ### ARRAYPATH Path array - **First prompt:** `Select objects:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/modify.md#arraypath--es-matrizcamino) ### TRIM Trim - **Aliases:** `TR` - **First prompt:** `Select object to trim or shift-select to extend or [cuTting edges/Crossing/mOde/eRase]:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/modify.md#trim--extend--es-recorta--rr--alarga--al) ### EXTEND Extend - **Aliases:** `EX` - **First prompt:** `Select object to extend or shift-select to trim or [Boundary edges/Crossing/mOde]:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/modify.md#trim--extend--es-recorta--rr--alarga--al) ### FILLET Fillet - **Aliases:** `F` - **First prompt:** `Select first object or [Undo/Polyline/Radius/Multiple]:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/modify.md#fillet--f--es-empalme--mp) ### CHAMFER Chamfer - **Aliases:** `CHA` - **First prompt:** `Select first line or [Undo/Polyline/Distance/Multiple]:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/modify.md#chamfer--cha--es-chaflan--ch) ### ERASE Erase - **Aliases:** `E`, `DELETE` - **First prompt:** `Select objects:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/modify.md#erase--e--delete--es-borra--b--delete) ### EXPLODE Explode - **Aliases:** `X` - **First prompt:** `Select objects:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/modify.md#explode--x--es-descomp--dp) ### JOIN Join - **Aliases:** `J` - **First prompt:** `Select source object or multiple objects to join at once:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/modify.md#join--j--es-unir--u) ### BREAK Break - **Aliases:** `BR` - **First prompt:** `Select object:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/modify.md#break--br--breakatpoint--es-parte--p--partirenpunto) ### BREAKATPOINT Break at point - **First prompt:** `Select object:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/modify.md#break--br--breakatpoint--es-parte--p--partirenpunto) ### MATCHPROP Match properties - **Aliases:** `MA`, `PAINTER` - **First prompt:** `Select source object:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/modify.md#matchprop--ma--painter--es-igualarprop--ip--copiarprop) ## Annotate ### TEXT Text - **Aliases:** `DT`, `DTEXT` - **First prompt:** `Specify start point of text or [Justify/Style]:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/draw.md#text--dtext--dt---text--es-texto--t--textodin---texto) ### MTEXT Multiline text - **Aliases:** `T`, `MT` - **First prompt:** `Specify first corner:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/draw.md#mtext--t--mt---mtext---t--es-textom--txm--mtext---textom---txm) ### TEXTEDIT Edit text - **Aliases:** `DDEDIT`, `ED`, `TEDIT` - **First prompt:** `Select an annotation object or [Undo/Mode]:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/modify.md#textedit--ed--ddedit--tedit--es-editartexto--ed--ddedic--tedit) ### DIMLINEAR Linear - **Aliases:** `DIMLIN`, `DLI` - **First prompt:** `Specify first extension line origin or :` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/dimensions.md#dimaligned--dal--es-acoalineada--acoali) ### DIMHORIZONTAL Horizontal - **First prompt:** `Specify first extension line origin or :` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/dimensions.md#dimvertical--es-acovertical) ### DIMROTATED Rotated - **First prompt:** `Specify angle of dimension line <0>:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/dimensions.md#dimrotated--es-acogirada) ### DIMRADIUS Radius - **Aliases:** `DIMRAD`, `DRA` - **First prompt:** `Select arc or circle:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/dimensions.md#dimradius--dimrad--dra--es-acoradio--acorad) ### DIMDIAMETER Diameter - **Aliases:** `DIMDIA`, `DDI` - **First prompt:** `Select arc or circle:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/dimensions.md#dimdiameter--dimdia--ddi--es-acodiametro--acodia) ### DIMANGULAR Angular - **Aliases:** `DIMANG`, `DAN` - **First prompt:** `Select arc, circle, line, or :` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/dimensions.md#dimangular--dimang--dan--es-acoangular--acoang) ### DIMBASELINE Baseline - **Aliases:** `DBA` - **First prompt:** `Select base dimension:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/dimensions.md#dimbaseline--dba--es-acolineabase--acoline) ### DIMCONTINUE Continue - **Aliases:** `DCO` - **First prompt:** `Select continued dimension:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/dimensions.md#dimcontinue--dco--es-acocontinua--acocont) ### DIMSPACE Adjust space - **First prompt:** `Select base dimension:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/dimensions.md#dimspace--es-acoespac) ### -DIMSTYLE Dimension style (command line) - **First prompt:** `Enter a dimension style option [Save/Restore/STatus/Variables/Apply/?] :` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/dimensions.md#-dimstyle--es--acoestil) ### -TEXT Text - **First prompt:** `Specify start point of text or [Justify/Style]:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/draw.md#text--dtext--dt---text--es-texto--t--textodin---texto) ### -MTEXT Multiline text - **Aliases:** `-T` - **First prompt:** `Specify first corner:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/draw.md#mtext--t--mt---mtext---t--es-textom--txm--mtext---textom---txm) ### DIMSTYLE Create and modify dimension styles - **Aliases:** `D`, `DIMSTY`, `DST`, `DDIM` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/dimensions.md#dimstyle--d--dimsty--dst--ddim--es-acoestil--aces--acoest--aes--dcota) ### STYLE Create and modify text styles - **Aliases:** `ST`, `DDSTYLE` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/dimensions.md#style--st--ddstyle--es-estilo--est--estilodd) ## Organize ### BLOCK Create block - **Aliases:** `B`, `ACADBLOCKDIALOG`, `BMAKE`, `BMOD` - **First prompt:** `Enter block name or [?]:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/draw.md#block--b--bmake--bmod--acadblockdialog--block---b--es-bloque--bq--modblq--bmake--bmod--acadblockdialog--bloque---bq) ### INSERT Insert a block from the Blocks palette - **Aliases:** `I` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/draw.md#insert--i--insert---i--es-insert--in--insert---in) ### ATTEDIT Edit attributes - **Aliases:** `ATE`, `DDATTE` - **First prompt:** `Select block reference:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/draw.md#attedit--ate--ddatte--eattedit--es-atredit--atr--ddatte--editatr) ### ATTDEF Define attributes - **Aliases:** `ATT`, `DDATTDEF` - **First prompt:** `Enter an option to change [Invisible/Constant/Verify/Preset/Lock position] :` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/draw.md#attdef--att--ddattdef---attdef---att--es-atrdef--at---atrdef---at) ### ATTDISP Attribute display - **First prompt:** `Enter attribute visibility setting [Normal/ON/OFF] :` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/draw.md#attdisp--es-atrvis) ### PURGE Purge - **Aliases:** `PU` - **First prompt:** `Enter type of unused objects to purge [Blocks]:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/modify.md#purge--pu--purge---pu--es-limpia--li--limpia---li) ### LTSCALE Linetype scale - **Aliases:** `LTS` - **First prompt:** `Enter new linetype scale factor <1.0000>:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/properties.md#linetypes--ltscale--lts--linetype--lt--ltype--ddltype---linetype---lt---ltype--es-escalatl--ec--tipolin--tl--tlinea--ddltype---tipolin---tl---tlinea) ### AUPREC Angle precision - **First prompt:** `Enter new value for AUPREC <0>:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/workspace.md#setvar--set--es-modivar--mv--a-system-variable-typed-by-its-name-auprec) ### SETVAR System variables - **Aliases:** `SET` - **First prompt:** `Enter variable name or [?]:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/workspace.md#setvar--set--es-modivar--mv--a-system-variable-typed-by-its-name-auprec) ### COLOR Color - **Aliases:** `COL`, `COLOUR` - **First prompt:** `Enter default object color [Truecolor] :` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/properties.md#colour--color--col--colour---color--es-color--col---color) ### LINETYPE Linetype - **Aliases:** `LT`, `LTYPE`, `DDLTYPE` - **First prompt:** `Enter an option [?/Set]:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/properties.md#linetypes--ltscale--lts--linetype--lt--ltype--ddltype---linetype---lt---ltype--es-escalatl--ec--tipolin--tl--tlinea--ddltype---tipolin---tl---tlinea) ### LWEIGHT Lineweight - **Aliases:** `LW`, `LINEWEIGHT` - **First prompt:** `Enter default lineweight for new objects or [?]:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/properties.md#lineweights--lwdisplay--lweight--lw--lineweight---lweight--es-grosorlin---grosorlin) ### -ATTDEF Define attributes - **Aliases:** `-ATT` - **First prompt:** `Enter an option to change [Invisible/Constant/Verify/Preset/Lock position] :` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/draw.md#attdef--att--ddattdef---attdef---att--es-atrdef--at---atrdef---at) ### -BLOCK Create block - **Aliases:** `-B` - **First prompt:** `Enter block name or [?]:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/draw.md#block--b--bmake--bmod--acadblockdialog--block---b--es-bloque--bq--modblq--bmake--bmod--acadblockdialog--bloque---bq) ### -PURGE Purge - **Aliases:** `-PU` - **First prompt:** `Enter type of unused objects to purge [Blocks]:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/modify.md#purge--pu--purge---pu--es-limpia--li--limpia---li) ### -COLOR Color - **First prompt:** `Enter default object color [Truecolor] :` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/properties.md#colour--color--col--colour---color--es-color--col---color) ### -LINETYPE Linetype - **Aliases:** `-LT`, `-LTYPE` - **First prompt:** `Enter an option [?/Set]:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/properties.md#linetypes--ltscale--lts--linetype--lt--ltype--ddltype---linetype---lt---ltype--es-escalatl--ec--tipolin--tl--tlinea--ddltype---tipolin---tl---tlinea) ### -LWEIGHT Lineweight - **First prompt:** `Enter default lineweight for new objects or [?]:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/properties.md#lineweights--lwdisplay--lweight--lw--lineweight---lweight--es-grosorlin---grosorlin) ### EATTEDIT Edit attributes - **First prompt:** `Select a block:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/draw.md#attedit--ate--ddatte--eattedit--es-atredit--atr--ddatte--editatr) ### BLOCKSPALETTE Show the blocks palette - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/blocks-palette.md#blockspalette--es-paletabloques) ### -INSERT Insert block - **Aliases:** `-I` - **First prompt:** `Enter block name or [?]:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/draw.md#insert--i--insert---i--es-insert--in--insert---in) ### LAYER Manage layers and layer properties - **Aliases:** `LA`, `DDLMODES` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/properties.md#layers--layer--la--ddlmodes--layerclose--es-capa--ca--layer--ddlmodes--cerrarcapa) ### LAYERCLOSE Close the Layer Properties Manager - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/properties.md#layers--layer--la--ddlmodes--layerclose--es-capa--ca--layer--ddlmodes--cerrarcapa) ### PROPERTIES Show the properties of the selected objects - **Aliases:** `PR`, `CH`, `MO` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/properties.md#properties-palette--properties--pr--ch--mo--propertiesclose--es-propiedades--pr--cerprop) ### PROPERTIESCLOSE Close the Properties palette - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/properties.md#properties-palette--properties--pr--ch--mo--propertiesclose--es-propiedades--pr--cerprop) ## Inquiry & view ### DIST Measure - **Aliases:** `DI` - **First prompt:** `Specify first point:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/inquiry.md#dist--es-dist--di--area--aa) ### AREA Area - **Aliases:** `AA` - **First prompt:** `Specify first corner point or [Object/Add area/Subtract area] :` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/inquiry.md#dist--es-dist--di--area--aa) ### ID ID Point - **First prompt:** `Specify point:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/inquiry.md#id--es-id) ### ZOOM Zoom - **Aliases:** `Z` - **First prompt:** `Specify corner of window, enter a scale factor (nX or nXP), or [All/Extents/Previous/Scale/Window/Object]:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/view.md#zoom--z--es-zoom--z) ### PAN Pan - **Aliases:** `P` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/view.md#pan--p---pan---p--es-encuadre--e---encuadre---e) ### -PAN Pan by points - **Aliases:** `-P` - **First prompt:** `Specify base point or displacement:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/view.md#pan--p---pan---p--es-encuadre--e---encuadre---e) ### UCS UCS - **First prompt:** `Specify origin of UCS or [Face/NAmed/OBject/Previous/View/World/X/Y/Z/ZAxis] :` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/coordinate-systems.md#ucs--es-scp) ### UCSICON UCS icon - **First prompt:** `Enter an option [ON/OFF/Noorigin/ORigin] :` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/coordinate-systems.md#ucsicon--es-simbscp) ### PLAN Plan view - **First prompt:** `Enter an option [Current ucs/Ucs/World] :` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/view.md#plan--es-planta) ### ELEV Elevation - **First prompt:** `Specify new default elevation <0.00>:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/coordinate-systems.md#elev--es-elev) ### VPOINT Viewpoint - **Aliases:** `VP`, `DDVPOINT` - **First prompt:** `Specify a view point or [Rotate]:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/view.md#-vpoint--vpoint---vp--vp--ddvpoint--es--ptovista---pv--ptovista--pv--ddvpoint) ### VIEW Preset views - **Aliases:** `V` - **First prompt:** `Enter an option [Orthographic]:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/view.md#-view--view---v--v--es--vista--vista---vi--vi) ### 3DORBIT 3D Orbit - **Aliases:** `3DO`, `ORBIT` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/view.md#3dorbit--3do--orbit--es-3dorbita--3do--orbit) ### NAVVCUBE ViewCube - **Aliases:** `CUBE` - **First prompt:** `Enter an option [ON/OFF] :` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/view.md#navvcube--cube--es-navvcube--cube) ### FILL Fill - **First prompt:** `Enter mode [ON/OFF] :` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/properties.md#fill--es-rellenar) ### UNDO Undo - **First prompt:** `Enter the number of operations to undo or [Auto/Control/BEgin/End/Mark/Back] <1>:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/command-line.md#undo--u--undo--redo--mredo--ctrlz--ctrly) ### MREDO Multiple redo - **First prompt:** `Enter number of actions or [All/Last]:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/command-line.md#undo--u--undo--redo--mredo--ctrlz--ctrly) ### -OSNAP Object snap modes - **Aliases:** `-OS` - **First prompt:** `Enter list of object snap modes:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/drafting-aids.md#-osnap---os--es--refent) ### SNAP Snap mode - **Aliases:** `SN` - **First prompt:** `Specify snap spacing or [ON/OFF/Aspect] <10.00>:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/drafting-aids.md#snap--sn--es-forzcursor--fc--snap-mode-f9) ### U Undo the last action - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/command-line.md#undo--u--undo--redo--mredo--ctrlz--ctrly) ### REDO Redo the last undone action - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/command-line.md#undo--u--undo--redo--mredo--ctrlz--ctrly) ### -VPOINT Viewpoint - **Aliases:** `-VP` - **First prompt:** `Specify a view point or [Rotate]:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/view.md#-vpoint--vpoint---vp--vp--ddvpoint--es--ptovista---pv--ptovista--pv--ddvpoint) ### -VIEW Preset views - **Aliases:** `-V` - **First prompt:** `Enter an option [Orthographic]:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/view.md#-view--view---v--v--es--vista--vista---vi--vi) ### FROM Pick a point offset from a base point - **Aliases:** `FRO` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/drafting-aids.md#object-snap-overrides-and-from) ### UNITS Control the precision and display format of coordinates and distances - **Aliases:** `UN`, `DDUNITS` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/workspace.md#units--un--ddunits--es-unidades--uns--ddunits) ### CLEANSCREENON Clear toolbars and palettes from the screen - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/workspace.md#cleanscreenon--cleanscreenoff--ctrl0--es-limpiapantact--limpiapantdes) ### CLEANSCREENOFF Restore the display as it was before Clean Screen - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/workspace.md#cleanscreenon--cleanscreenoff--ctrl0--es-limpiapantact--limpiapantdes) ## Files & clipboard ### COPYCLIP Copy - **First prompt:** `Select objects:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/clipboard-and-files.md#copyclip--cutclip--copybase--pasteclip--ctrla--es-copiapp--cortapp--copiarbase--pegapp) ### CUTCLIP Cut - **First prompt:** `Select objects:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/clipboard-and-files.md#copyclip--cutclip--copybase--pasteclip--ctrla--es-copiapp--cortapp--copiarbase--pegapp) ### COPYBASE Copy with base point - **First prompt:** `Specify base point:` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/clipboard-and-files.md#copyclip--cutclip--copybase--pasteclip--ctrla--es-copiapp--cortapp--copiarbase--pegapp) ### NEW Start a new drawing - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/clipboard-and-files.md#new--qnew--es-nuevo--rnuevo) ### QNEW Start a new drawing - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/clipboard-and-files.md#new--qnew--es-nuevo--rnuevo) ### QSAVE Save the drawing to a file - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/clipboard-and-files.md#qsave--saveas--save--open-ctrls--ctrlshifts--ctrlo--es-guardarr--guardarcomo--guardar--abre) ### SAVEAS Save the drawing to a file under a new name - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/clipboard-and-files.md#qsave--saveas--save--open-ctrls--ctrlshifts--ctrlo--es-guardarr--guardarcomo--guardar--abre) ### SAVE Save the drawing to a file - **Aliases:** `SAVEURL` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/clipboard-and-files.md#qsave--saveas--save--open-ctrls--ctrlshifts--ctrlo--es-guardarr--guardarcomo--guardar--abre) ### OPEN Open a drawing file - **Aliases:** `OPENURL` - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/clipboard-and-files.md#qsave--saveas--save--open-ctrls--ctrlshifts--ctrlo--es-guardarr--guardarcomo--guardar--abre) ### PASTECLIP Paste the clipboard into the drawing - [What it does and still lacks, in detail (in English)](https://github.com/ovelilla/mellowcad/blob/main/docs/coverage/clipboard-and-files.md#copyclip--cutclip--copybase--pasteclip--ctrla--es-copiapp--cortapp--copiarbase--pegapp)